Knot List: Tensionless Hitch ‐ Step-by-Step
Home Page Essential Knots References Which Rope Thanks Grog Story
Knots by Name Terminology Safety Rope Properties About Contact Knot Store
Use Arrow Keys
Tensionless Hitch TyingPrepare sufficient rope to make 3 or 4 turns around the post. Make a Figure 8 Loop in the end and attach a carabiner. Wrap the rope around the post. Make sure there is sufficent slack and clip the carabiner to the standing end. A kink in the standing end is an error.
Tensionless Hitch Details
Uses: The Tensionless Hitch shares a critically important feature with the Round Turn and Two Half Hitches. It is used to gain secure control of a loaded line by wrapping the rope around a post or tree several times. This is the key to the safe handling of heavy loads. Ashley described a knot employing the same principle but provided no name for it (Ashley ABOK #2047, p 332). In his example he completed the knot with two half hitches tied around the standing end.
Similar Knot: Another similar knot is the Lighterman's – which starts with turns wrapped around a post and is completed with alternating turns enclosing the standing end. Of these two knots we prefer the Lighterman's because it exerts less rotational force on the post.
Advantages: An exception might be a rope loaded to near breaking point because the Tensionless Hitch is claimed to preserve most of the rope's breaking strain. However, this knot is nearly always used to support critical loads, i.e., people. The required safety factor renders this advantage more theoretical than practical. More plainly, if you're that worried, choose a larger rope.
Number of Turns: The diameter of the post or tree selected should be at least eight times the diameter of the rope. Descriptions of the Tensionless Hitch indicate that the number of turns used may be increased when the post is smooth and polished. Confusing language describes the number of turns. If a rope has made a single "wrap", it has been passed behind a post, and then knotted to itself; it has NOT made "one Round Turn". Two "wraps" for a climber is called "One Round Turn" in boating. In the animation the rope wraps around the pole three times making "two round turns".
Tying it: A Figure 8 Loop in the end is clipped to the standing end with no tension; hence the name "tensionless". The animation shows a carabiner completing this knot. However, the tail can also be secured directly to the standing end using Half Hitches or a Figure 8 Follow Through.
Nomenclature: The name "Tensionless" has been deprecated. However, suggestions for some alternative, e.g., "High Strength Tie-Off", or "Multi-Wrap Anchor", have not gained favor – for the obvious reason that "Tensionless" is in widespread use.
Disclaimer: Any activity that involves ropes is potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. No responsibility is accepted for incidents arising from the use of this material.