Better to know a knot and not need it, than need a knot and not know it.

Follow animatedknots on Twitter
Windows-IconAndroind-IconApple-IconThe Best Knots Apps:

Knot List: Buntline Hitch ‐ Step-by-Step

 Icon Home About Testimonials Thanks Reviews Grog Story References

Terminology Which Rope Rope Properties Essential Knots Rope Safety Contact Knot Store
Buntline Hitch, Showing Name
Buntline Hitch, Step-by-Step Animation
 

Speed Control Loop Control Use Arrow Keys Hor-Flip Vert-Flip


Buntline Hitch Tying

Pass the tail around the pole. Make a complete turn around the standing end and then through the hole beside the pole. Form a Half Hitch to complete the knot.
View Video Below

Buntline Hitch Details

Uses: The Buntline Hitch (ABOK # 1847, p 310) was originally employed to secure the buntlines to the foot of the square sails. Repeated shaking and jerking by a flapping sail tended to tighten this knot - hence its value.

Structure When complete, the finished knot is a clove hitch around the standing end but the clove hitch is inverted when compared to the clove hitch in a Round Turn and Two Half Hitches. However, while it is being tied the first part of the knot should not be called a Half Hitch. Up to frame 5 in the animation the rope merely wraps around the standing end.

Pictures of First tie Buntline, then EStar Hitch
First tie Buntline, then EStar Hitch

First tie Buntline, then EStar Hitch

EStar – More Secure Version for Dyneema: The Buntline Hitch is secure in traditional ropes. However, like most knots it will slip when tied using Dyneema Hollow Braid, e.g., Samson Amsteel Blue. Evans Starzinger devised and tested the EStar Hitch which he reports does not slip. The knot starts by tying a Buntline Hitch and in the animation on the right the Buntline is completed but loose. The tail end is passed back around the bar and back down through the knot beside the standing end. The two ends are then compressed against each other as they try to slip in opposite directions inside the Clove Hitch.

Pictures of Four-in-Hand Tie
Four-in-Hand Tie

Four-in-Hand Tie

Other Uses: Although it is not obvious, the same knot is widely used for neckties, where it is known as the Four-in-Hand Knot. The difference is merely in the material used and in the alignment of the final part of the knot so that the two ends emerge parallel.

Advantages: It is more secure than two Half Hitches and very resistant to shaking loose.

Disadvantages: This knot cannot be tied under a load and, after being heavily loaded, it is more liable to jam and be awkward to release than two Half Hitches.

Disclaimer: Any activity that involves ropes is potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. No responsibility is accepted for incidents arising from the use of this material.

Copyright
© 2007 - 2018
All Rights Reserved
Grog LLC

Switch to:
Mobile
Version

Copyright and
Privacy Policy


V. 8.2. 8/8/18
Passport Studio

Half Price Offer

Rope Chafe Wear Pads
Adhesive Stainless Steel
Prevent Fiberglass Chafe. WearPad Order Wear Pads