  |
 |
  Automatic: Fast Slow
|
|
1 2 3 4 5 6 7 Structure
To tie the knot move the mouse along the numbers 1 - 7.
Alternate between 7 and Structure to see the structure. |
History: The Prusik knot was developed in 1931 by Dr.Karl Prusik (sometime president of the Austrian Mountaineering Club and often misspelled "Prussik".) It appears to be identical in structure to a knot described by Ashley for hoisting a spar. (ABOK # 1763, p 300), but Ashley did not expressley describe the slide and grip feature.
Slide and Grip Knots: The Prusik is a slide and grip knot; because it is symmetrical, it is useful if a load might need to be applied in either direction. For loads which are always applied in the same direction other knots are preferred such as the Klemheist (see picture on left) or the Bachmann (see picture on right)
Uses: Its principal use is allowing a rope to be climbed. Two Prusik loops are alternately slid up the static rope: a long Prusik loop allows the climber to lift himself using leg power, and a second short Prusik loop is attached to the harness. In rescue work, if a climber has to be pulled up, a Prusik loop could be used to attach a pulley block purchase system to a climbing rope. |
Disclaimer: Any activity that involves ropes is potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. For this reason no responsibility is accepted for incidents arising from the use of this material.
| Copyright © 2009 Grog LLC All Rights Reserved |
 |
Updated: Jun 24th 2009 |
