TIE KNOTS THE FUN AND EASY WAY
Better to know a knot and not need it, than need a knot and not know it.
Scouting Index Scouting Requirements
Alpine Butterfly Loop Back Splice Barrel Hitch Bowline Cleat Hitch (Halyard) Clove Hitch (End) Coil Unattached Rope Constrictor (Twisting) Double Fisherman's Double O'hand Stopper Eye Splice Figure 8 Half Hitch Lashing, Square Lashing, Diagonal Lashing, Round Lashing, Shear Lashing, Tripod Marlinspike Hitch Midshipman's Hitch Rolling Hitch Round Turn & Hitches Sailmaker's Whipping Sheet Bend Sheepshank Square (Reef) Timber Hitch Trucker's Hitch Whipping (Common)
Knot Terminology Knot & Rope Safety Rope Properties Contact
Animation: Tripod Lashing Technique
Use the Arrow Keys or hover over the Buttons above. View Video
Tripod Lashing TechniqueStart with a Clove Hitch around one pole. Wrap about six racking turns around the three poles weaving in and out between them. Make two or three tight frapping turns in the two gaps. Finish with a Clove Hitch. Cross the two outside poles to form the tripod.
Tripod Lashing Details
Use: Ashley shows a Tripod Lashing (ABOK # 2111, p 342) but he shows the two side legs spreading apart from each other instead of crossing. The method shown in the animation is preferred because the legs bind against each other for greater stability.
Racking Turns: The lashing passes to and fro between the poles. This increases the contact between rope and wood and reduces slipping. Such turns are known as Racking turns.
Frapping Turns: The turns surrounding the lashing at right angles exert a tightening effect on the lashing. These turns are known as Frapping Turns.
Options: Some descriptions start with the center pole extending in the opposite direction from the two side legs. Forming the tripod then twists and tightens the lashing, and can even break it if tied too tightly. A lashing which is too tight or extends for too great a length may either prevent the tripod from being formed or may overload the rope. In this respect the Tripod Lashing differs from other lashings: it is possible to make it too tight! On occasion, trial and error may be required to obtain the correct tension.
Scouting: Four tripods can be used to support a pair of horizontal poles under a table.
Disclaimer: Any activity that involves ropes is potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. No responsibility is accepted for incidents arising from the use of this material.