bannerimage
Animated Knots by Grog
Follow animatedknots on Twitter

TIE KNOTS THE FUN AND EASY WAY

Better to know a knot and not need it, than need a knot and not know it.

Water Bowline Knot

Boating Index Boating Usage

Alpine Butterfly Bend Alpine Butterfly Loop Anchor Hitch Ashley Stopper Knot Bowline Bowline on a Bight Bowline, Running Buntline Hitch Carrick Bend Chain Splice Cleat Hitch (Deck) Cleat Hitch (Halyard) Clove Hitch (End) Constrictor (Twisting) Double O'hand Stopper EStar Stopper Knot Eye Splice Figure 8 Icicle Hitch (Loop) Halyard Hitch Heaving Line Knot Lighterman's Hitch Midshipman's Hitch Pile Hitch Rat-Tail Stopper Rolling Hitch Round Turn & Hitches Soft Shackle Soft Shackle Edwards Trucker's Hitch Stevedore Stopper Zeppelin Bend

Knot Terminology Knot & Rope Safety Rope Properties Contact About Facebook
Animation: Water Bowline Knot Tying (Boating)Animation: Water Bowline Knot Tying
Water Bowline Knot Tying (Boating)
View Video

Water Bowline Knot Tying

Use enough rope to form the knot. In the standing end make one loop, and then another. Overlap the two loops as a Clove Hitch. Pass the tail end up through the Clove Hitch, around the standing end, and down through the Clove Hitch. Tighten the Clove Hitch to finish the knot.

Water Bowline Knot Details

Uses: The Water Bowline is described by Ashley as a Bowline with an extra half hitch (ABOK # 1012, p 186). It makes a secure loop in the end of a piece of rope.

Comparison: The Bowline and the Water Bowline are linked here for easy comparison.

Name: Its name suggests it might have been developed for more secure use in water and Ashley's description starts with "If a Bowline is to be towed through water...."

Pictures of Double Bowline
Double Bowline

Double Bowline

Double Bowline: The animation shows the two initial loops overlapped to make a clove hitch. An excellent alternative is the Double Bowline (ABOK # 1013, p 186). There are still two loops but they lie beside each other with no overlap. For photography the loops are shown around each other. When tightened they lie by beside each other as two adjacent coils.

Tying it: I prefer to form the clove hitch first and then tie the knot by threading the end up, around, and down. Some authorities prefer to form each half hitch in sequence by using the short end to make a half hitch around the standing end and then pulling to flip the half hitch into the standing end.

Advantages: It is a stable knot that is fairly easy to tie and to inspect. The extra half hitch, forming a Clove Hitch, provides a more secure grip on the tail end.

Clove Hitch Option: The Clove Hitch tends to separate slightly under load. Some authors prefer to invert the Clove Hitch so that the tension compresses the two half hitches against each other. Although this version may be slightly more secure, it may also be slightly harder to untie.

Less Likely to Shake Undone Unloaded: If I had used a Water Bowline instead of a Bowline I might not have lost my scrubbing brush.

Disclaimer: Any activity that involves ropes is potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. No responsibility is accepted for incidents arising from the use of this material.

Copyright
© 2007 - 2016
All Rights Reserved
Grog LLC

Switch to:
Mobile
Version

Copyright and
Trademark

Version 6.0 Jan 1, 2016
Get Our Apps
adimage
adimage
adimage

Half Price Offer

Rope Chafe Wear Pads
Adhesive Stainless Steel
Prevent Fiberglass Chafe. WearPad Order Wear Pads