 |
|
Recently developed to protect fiberglass gel coat from rope burns. Where rope chafes against a fiberglass edge, consider using a stainless steel wear pad. These pads are flexible and will wrap round most simple curves.
A new idea for those who hate to see their beautiful cockpits and cabin sides damaged by the careless use of sheets and furling lines.
The WearAndTear pad is a simple, long lasting solution to prevent a gel-coat suffering from rope burn. Typical areas subject to unsightly visual damage are cockpit sides and cabin tops.
Easy to fit and visually attractive in polished stainless steel, each pad unobtrusively protects your gelcoat surface.
|
|
|
|
The WearAndTear pads are laser cut sheets of ultra thin (0.002"), corrosion resistant, 301, stainless steel supplied with a high quality self adhesive 'double sided' tape. The pad can be fixed semi-permanently to any flat or curved surface provided that the curvature is uni-directional: the material will not stretch to accommodate more complex shapes.
When fitting pads around radii of less than 2", it is recommended to pre-form them to suit the curvature of the application area. This will minimise the risk of de-lamination caused by the springiness of the stainless steel.
Overseas payments. Payment is accepted by credit card from anywhere in the World.
To place an order, go to our Partner Website WearAndTear Pads.
Disclaimer: Activities involving ropes are potentially hazardous. Lives may be at risk - possibly your own. Considerable attention and effort have been made to ensure that these descriptions are accurate. However, many critical factors cannot be controlled, including: the choice of materials; the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. For this reason no responsibility is accepted for incidents arising from the use of this material.
| Copyright © 2008 Grog LLC All Rights Reserved |
 |
Updated: May 15th 2008 |
